Auxiliary Power Contact Block for Jeep TJ | LJ | YJ
Auxiliary Power Contact Block for Jeep TJ | LJ | YJ
Designed for the TJ | LJ | YJ this device allows the user to gain access to 12v auxiliary power off the rear tailgate brake light contacts on the tub side. On the back tailgate there are a set of contacts for the rear spare tire brake lights. Most get away with this light, but these contacts remain. This device magnetically attaches to those contacts and allows the user to tap off those contacts for auxiliary power in the rear. We use ours to charge a generator, power a refrigerator and has been great for over head lights while cooking or setting up camp. SOME MODIFICATIONS ARE REQUIRED video link for installation and review: https://youtu.be/mV3zdJJxZ6s
To protect this circuit I use a 7.5amp fuse, not the fuse that comes with the kit.
Remember the longer the wire the less amps it will carry.
You will need to measure the length wire and fuse the circuit properly
Example:
If you extend the 14g wire to 15ft fuse for 7.5 amps maximum
16 guage wire at 15ft can carry 5 amp = fuse 5 amp
12 guage wire at 15ft can carry 10amp =fuse 10 amp
14 guage wire at 15ft can carry 7.5amos = fuse 7.5
Contents: 1 x contact block with magnets 🧲
1 x 12v cigarette socket connector
1 x bullet style connector
4 x heat shrink butt connectors
Refer to video for installation instructions ✌️
The kit comes with mostly everything you need after you install your wiring harness to the rear contacts.
Here are some additional things you may need:
The spod I use: Recommended
https://amzn.to/3fvvnQd
Check out the wiring harness here:
https://amzn.to/31OwM19
Check out the switch panel here
https://amzn.to/3qgEfiQ
Shipping & Returns
Shipping & Returns
we are currently not accepting returns
Care Instructions
Care Instructions
--CARE--
Wash inside out with like colors | Tumble dry on low or hang dry (recommended) | No Bleach | Do not iron or dry clean